Custom High Precision Yellow Compression Coil Springs and Mould Die Springs

• Customization: Available
• Function: Pressed, Buffer
• Material: Alloy
• Model NO.: Die Springs
• Load Type: Compression
• Production Process: Cold Roll
• Temperature Limit: Less Than 80°c
• Load Level: Extremely Heavy Load
• Usage Count: 1 Million Times+
• Whether to Customize: Customizable
• Production Address: Wenzhou, Zhejiang, China
• Delivery Time: Stocks Now(or 8-12 Days)
• Transport: DHL,FedEx,UPS,TNT or by Sea
• Transport Package: Inner Plastic Bags, Outer Boxes or Wooden Box,
• Specification: Standard parts and customizable
• Trademark: cungang
• Origin: Wenzhou
• Production Capacity: 50000pieces/Year

Product Description

Custom High Precision Compression Mould Die Springs coil springs
Cungang Mould Parts Co., Ltd. is a company integrating development, design, production and sales of kimono
A modern enterprise with services as a whole. Main products: precision GP guide post, GA/GB guide sleeve,
Miniature ball guide assembly, ammonia gas spring. SRP/TRP ball guide assembly,
SGP/TGP sliding guide assembly, A-TRP/T-TRP terminal in-mold guide pillar assembly.
Independent guide posts, automotive mold guide components. High-quality straight guides for plastic molds and die-casting molds
Column, guide sleeve (metric torso, straight torso in the torso), back stitch, support column, SKD-61
Thimble, 65mn ordinary thimble, pallet, sprue sleeve, tube, insert, precision solid
Fixed pin tapping pin. T-pin cross pin, punch pin and other heterosexual mold parts, production
Products are widely used in metal stamping molds, die-casting molds, plastic molds, automobile molds,
Mechanical automation equipment, semiconductors, medical equipment, electrical appliances, electronics and other fields.
Advantages of village steel company sales agent: Datong spring, Guangben high-quality mold spring, domestic
Mold rectangular spring.
The company relies on advanced equipment, sophisticated testing instruments, and experienced professional technology
Talents and scientific management, through strict inspection of each process to ensure product quality,
Established "high reputation, high quality, sufficient inventory, and accurate delivery" among the "big customer groups in Guangzhou"
Good corporate image.
The company adheres to the principle of acting in the interests of customers from the standpoint of customers, in line with professionalism, quality,
Service this-business philosophy, wholeheartedly provide new and old customers with better products, more
Excellent service.

1. Please contact our customer service before shooting, more communication will reduce a lot of unnecessary trouble.

2. After payment, the customer service arranges the delivery in order of order

3. After receiving the goods, please check in person to confirm that the packaging is not damaged and the product is
correct before signing for it. If an abnormality is found, please return it immediately. Otherwise, it will be regarded as
the buyer's approval of the purchased goods.

4. All products support L/C, T/T, D/P, PayPal and Alipay transactions. To protect the interests of buyers, if you need to
transfer or remit transactions, please call customer service first. After confirming the payment, please get in touch with
the store as soon as possible, and we will arrange the delivery for you

5. After delivery, you can independently query the waybill information according to the number of the delivery note. If
you have any questions during the transportation of goods, you can consult customer service. We will ask the freight
company to help solve

6. Regarding the evaluation, please don't give me a bad evaluation easily. Any problems can be solved through
communication. Please trust our after-sales service team.

7. We will treat every customer attentively and properly handle every problem.

Simflex spring's characteristics and advantage

1.  
2. Spring material:The spring produced by high-quality 50CrVa,55CrSi and SUP-12,SUP-10 of oil quenching steel wire,it has good performance on fatigue resistance,temperature resistance,and toughness.
3. Material formation:The steel wire formed in the shape of rectangular section with rounded comers and rounded edges.Different from regular springs,Simflex spring can reduce the stress concentration in running at high speed.
4. Prestressing process:after more than three times prestressing processing,the spring eliminates the internal stress,it will help to improve spring deformation and length reduction when use it.
5. Reinforcement process:spring goes through surface reinforcement process,it improves surface structure,extends the spring fatigue life.
6. Spring's life time:according to the mould/die deflection P,life time can be 1 million times for P1,0.5 million times for P2,0.3 million times for P3.
7. Working Frequency:the highest frequency can be 200 times/min.
8. 

The company's other main products, please enter the company's homepage or consult customer service to get in touch with us for details



How to use coil springs and precautions
Use when there is no spring guide
If the foreign object is clamped, the spring coil of the corresponding part will not be effective, as shown in Figure 1.
When used without a spring guide, the spring will bend longitudinally and transversely, as shown, and cause other partial compression, which is actually equivalent to reducing the effective
The inner side of the bend will generate local high stresses, which will eventually break. Therefore, please be sure to use the number of spring coils, which will generate high stress and cause final breakage. So please be careful not
Spring guides such as guide pins and outer diameter guides. Generally speaking, the guide pin is
Allow foreign objects to enter. It is most ideal to use after passing through from top to bottom.

Use in places with poor parallelism of the installation surface
If the inner diameter of the spring and the guide pin are poorly parallel to the mounting surface, the spring will bend horizontally, and the inner side of the bend is generated. It is recommended that the guide pin rod diameter be set to be about 1.0mm smaller than the inner diameter of the spring. If the gap between the guide pin and the guide pin is small, the guide pin will wear the inner diameter of the spring, and the wear part will be the starting point, causing local high stress, resulting in final breakage. In addition, as shown in Figure-4, when the parallelism of the mold is poor, the spring will be bent and the number of uses corresponding to the allowable compression amount will eventually be broken. And so on, leading to the ultimate loss. Please improve the parallelism of the mounting surface, and do not exceed the allowable. In addition, if the gap between the guide pin and the guide pin is too large, it will cause longitudinal bending. In addition, the use conditions such as the amount of compression. As shown in Figure 1, springs with longer free lengths (springs with free length/outer diameter=4 or more) must have a drop in the guide pin to avoid contact with the inner diameter of the spring when it is bent horizontally.

Spring used in series
About the outer diameter of the spring and the countersunk hole
When used in series, as shown in Figure 5, the spring is bent and sometimes stuck on the guide pin or countersunk hole, and the same reason as causes the final breakage. In addition, due to the spring
It is recommended that the diameter of the countersunk head be set to be about 1.5mm larger than the outer diameter of the spring. If the load is different from the counterbore, the spring with a smaller load cannot resist the spring with a larger load. When the gap is small, the outer diameter will expand due to the compression of the spring, and the outer diameter will be constrained, resulting in a small load The compression amount of the spring increases, resulting in reduced durability and breakage. The two form a stress concentration, resulting in a final breakage. It is ideal for springs with longer free lengths to adopt the counterbore shape shown in Figure 1. When springs are used in series, each spring constant value is halved.

Springs are used in pairs
When the guide length and the depth of the counterbore are small
If the length of the guide is small, the spring will contact the front end of the guide when it is bent longitudinally. For example, when the springs are used in pairs, after the spring is bent longitudinally, the inside will enter between the outer wires (and vice versa) , And for the same reason as , it leads to the final friction and the final breakage. It is recommended to set the guide length to the initial setting height×1/2 to be damaged. In addition, a chamfering of approximately C3 size is performed.

Horizontal use of wind spring
Use that exceeds the maximum compression (when used close to the compression length)
When the spring is used horizontally, the guide pin will wear out the inner diameter of the spring, and start with the wear part.
When used under the condition of exceeding the maximum compression, the cross section will produce high stress exceeding the calculated value.
Points, leading to the ultimate loss. In addition, as the effective spring coil is gradually close to the compressed length, the spring constant increases, and the load line graph rises, which will generate high stress, resulting in final breakage. This is also the cause of deformation. Therefore, do not overwind the number of uses corresponding to the allowable compression amount for the use temperature. The load and other data described in the catalog are measured at room temperature (below 40°C). When the operating environment temperature exceeds room temperature, there will be differences due to various conditions, which may cause the load and durability times to decrease.

Use without preload
The ambient temperature for use should be below 80°C. Although the heat-resistant temperature of spring wire is higher than (round wire
If there is a gap, the spring will move up and down to generate an impact force, and will bend vertically and horizontally. If it is used after preloading, the top and bottom of the spring will become stable.
120°C, rectangular 200°C) use temperature, but when used under conditions that exceed the use environment temperature, the function will be greatly reduced.